Important Things that You Must Know About Crane Inspection Services
After the installation of the crane in the workplace, you are not yet an expert on the reasons why this should undergo inspection. You should also know about the frequency that this happens and who is qualified to perform such crane inspection.
Keep in mind that the OSHA requires that the different active cranes should be annually inspected. Daily or weekly usage can wear or damage those essential crane components. The wear can certainly lead to a breakdown or a dangerous failure which puts you, the time or the company at risk. You need to remember that the routine inspections can really help you identify those potential problems and also address them in advance prior to the occurrence of such costly or irreversible incident.
According to the CMAA or the Crane Manufacturers Association of America, the crane inspector needs to have at least 2,000 field hours of experience which is directly related to the servicing, maintenance, modifying, repairing and also functional testing of the cranes and equipment. One must not do the inspections if he doesn’t have the right training and when one doesn’t have a knowledge on such applicable codes and regulations.
The CMAA states as well that the inspector must have formal training in the areas of federal, local and state codes and hoists. Moreover, one must be aware of the safety and design codes that are related to such overhead cranes. There must also be safe operating practices of the hoists and cranes. They should also have a good understanding about how to write a report as well as documentation procedures. It is necessary for one to have such knowledge on the crane and that hoist terminology for a really effective communication.
The initial inspection is actually a documented visual inspection which is needed after the installation of a new crane or hoist and for such equipment that has been reinstalled following modification, repair or alteration. After which, the functional inspection is done. Prior to each shift, the crane’s functionality should be tested. OSHA states that you must visually test it for maladjustments which can interfere with the proper crane operation. It is necessary that one must check for the deterioration or leakage of the lines, tanks, the drain pumps, valves and other parts of the air and the hydraulic systems. There are many other things that should be checked.
Frequent and periodic maintenance are necessary. All of the areas of the functional test inspection, other than the checking the operating mechanisms of the crane. The inspector needs to check the hoist brake, the wire rope, that load chain and should listen to the abnormal sounds.